AEG 944 187 934 Gebruikershandleiding - Pagina 42

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG 944 187 934. AEG 944 187 934 48 pagina's.

Pagina afdrukken
AEG 944 187 934 Gebruikershandleiding
42
www.aeg.com
Problem
The oven does not heat up.
The lamp does not operate.
The display does not show
the time during the off sta‐
tus.
The food sensor does not
operate.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "C2".
The display shows "C3".
The display shows "F102".
Possible cause
The fuse is blown.
The lamp is defective.
The display is deactivated.
The plug of the food sensor
is not correctly installed into
the socket.
The temperature is too low
or too high.
You left the dish in the oven
for too long.
You want to start the Pyroly‐
sis or Defrost function, but
you did not remove the food
sensor plug from the socket.
The cleaning function does
not operate. You did not fully
close the door, or the door
lock is defective.
•
You did not fully close the
door.
•
The door lock is defec‐
tive.
Remedy
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali‐
fied electrician.
Replace the lamp.
Touch
and
at the
same time to activate the
display again.
Put the plug of the food sen‐
sor as far as possible into
the socket.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Remove the food sensor
plug from the socket.
Fully close the door.
•
Fully close the door.
•
Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
•
If the display shows
"F102" again, contact the
Customer Care Depart‐
ment.