Alirac ECL-160 Bedieningshandleiding - Pagina 16

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Alirac ECL-160. Alirac ECL-160 16 pagina's.

(Figures for reference are subject to change without notice.)

No.

Description

ECL Welder

Operator's Manual

Electrode Holder

Earth Clamp

Face Mask with Filter

Brush & Hammer

NOTES: All above mentioned are based on the ordering contact unless otherwise

agreed by the parties.

* This machine is an indoor equipment and the attacks of rain and snow should be

avoided in the process of transportation and storage. While loading and unloading,

more attention should be paid on the package with words of warning. Storage

warehouse should be kept dry with good air circulation and no corrosive gas or dust.

The temperature should be maintained from -25℃ to 55℃ and relative humidity

must be lower than 90%.

* If the products are still needed to continue storing after stripping, repacking

should be carried out according to original package's requirement. Remember before

storage, don't forget to clean and seal it with plastic bags.

* Users should maintain the cartons and shock blocks in order to be properly

packaged in need of long distant transportation. For the long distant transportation, it

should be retrofitted with a wooden case and mark the "up" or "rain" symbols.

Circuit Schematic of ECL Welder

9 Accessories

Qty.

1set

1pc