Alirac HE115-125/950 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alirac HE115-125/950. Alirac HE115-125/950 10 pagina's.

Fig2

Fig3

Fig4

Fig5

inner flange, look nut designed for use with

cut-off wheels.(Fig 1)

1.Mount the inner flange onto the

spindle. Fit the wheel/disc on the inner

flange and screw the outer flange onto the

spindle (Fig 2).

2.To tighten the outer flange. Press the

shaft lock firmly so that the spindle cannot

revolve, then use the lock nut wrench and

securely tighten clockwise. (Fig 3).

3.To remove the wheel, follow the

installation procedure in reverse.

Notice:

The groove of INNER FLANGE must

align the flatness of spindle when you install

the wheel and tighten enough.

Side grip

Caution:

Always be sure that the side grip is

installed securely before operation.

The both sides of tool's head are

designed with two screw holes to assemble

the grip side.

Screw the side grip securely on the

position of the tools as shown in the Fig 4.

Hold the side grip firmly by hand and

you will control the tool better.

Switch action

Caution:

Before plugging in the tool, always

Check the shaft lock in the "off " position

twice.Switch can locked in "ON" position

for ease of operator comfort during extended

use. Apply caution when locking tool in

"ON" position and maintain firm grasp on

tool.

To start the tool, simply only press the

switch trigger. For continuous running press

the switch trigger and then depress the self

lock button.

-4-