Garmin Fenix 5 Gebruikershandleiding - Pagina 35

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garmin Fenix 5. Garmin Fenix 5 48 pagina's. Turn on smart watch of 2022 - go wiki
Ook voor Garmin Fenix 5: Gebruikershandleiding (42 pagina's), Faq (5 pagina's), How-To (8 pagina's)

Pagina afdrukken

To start a breathing activity, select DOWN >

duration for the breathing activity in minutes.

Customizing the Controls Menu

You can add, remove, and change the order of the shortcut

menu options in the controls menu

page

1).

Hold UP.

Select Settings > Controls.

Select a shortcut to customize.

Select an option:

• Select Reorder to change the location of the shortcut in

the controls menu.

• Select Remove to remove the shortcut from the controls

menu.

If necessary, select Add New to add an additional shortcut to

the controls menu.

Watch Face Settings

You can customize the appearance of the watch face by

selecting the layout, colors, and additional data. You can also

download custom watch faces from the Connect IQ store.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you must

install a watch face from the Connect IQ store

Features, page

10).

You can customize the watch face information and appearance,

or activate an installed Connect IQ watch face.

From the watch face, hold UP.

Select Watch Face.

Select UP or DOWN to preview the watch face options.

Select Add New to scroll through additional pre-loaded watch

faces.

Select

> Apply to activate a pre-loaded watch face or an

installed Connect IQ watch face.

If using a pre-loaded watch face, select

Select an option:

• To change the style of the numbers for the analog watch

face, select Dial.

• To change the style of the hands for the analog watch

face, select Hands.

• To add the plane's tail number to the aviation-specific

analog watch face, select Tail Number.

• To change the style of the numbers for the digital watch

face, select Layout

• To change the style of the seconds for the digital watch

face, select Seconds.

• To change the data that appears on the watch face, select

Data.

• To add the universal coordinated time or the plane's tail

number to the aviation-specific digital watch face, select

UTC/Tail Number.

• To add or change an accent color for the watch face,

select Accent Color.

• To change the background color, select Bkgd. Color.

• To save the changes, select Done.

Sensors Settings

Compass Settings

Hold UP, and select Settings > Sensors & Accessories >

Compass.

Customizing Your Device

, and enter a

(Viewing the Controls Menu,

(Connect IQ

> Customize.

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the Compass Manually, page

Display: Sets the directional heading on the compass to letters,

degrees, or milli-radians.

North Ref.: Sets the north reference of the compass

North Reference, page

29).

Mode: Sets the compass to use electronic-sensor data only

(On), a combination of GPS and electronic-sensor data when

moving (Auto), or GPS data only (Off).

Calibrating the Compass Manually

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Hold UP.

Select Settings > Sensors & Accessories > Compass >

Calibrate > Start.

Follow the on-screen instructions.

TIP: Move your wrist in a small figure eight motion until a

message appears.

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold UP.

Select Settings > Sensors & Accessories > Compass >

North Ref..

Select an option:

• To set geographic north as the heading reference, select

True.

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

• To set the magnetic variation value manually, select User,

enter the magnetic variance, and select Done.

Altimeter Settings

Hold UP, and select Settings > Sensors & Accessories >

Altimeter.

Barometer: Allows you to set the barometric pressure manually,

or select a value from the nearest METAR station through the

Garmin Connect Mobile app.

Altitude Alert: Sets an alarm to vibrate when you reach a

specified altitude.

O2 Alert: Sets an alarm to vibrate when you reach a low-oxygen

altitude.

Sync to Elevation: Allows you to synchronize the device to your

current elevation manually.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation.

From the altimeter widget, hold UP.

Select Options.

Select an option:

• To enter the current elevation, select Calibrate > Yes.

29).

(Setting the

NOTICE