AEG F66742W0P Gebruikershandleiding - Pagina 20

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG F66742W0P. AEG F66742W0P 48 pagina's.

Pagina afdrukken

www.aeg.com

Problem and alarm code

Small leak from the appli-

ance door.

The appliance door is diffi-

cult to close.

Rattling/knocking sounds

from inside the appliance.

The appliance trips the cir-

cuit-beaker.

Refer to "Before first use",

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

12.1 The washing and drying results are not satisfactory

Problem

Poor washing results.

Poor drying results.

There are whitish streaks or

bluish layers on glasses and

dishes.

Possible cause and solution

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

• Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• For the best drying performance activate the option

XtraDry and set AirDry.

• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.