AEG FAVORIT 40620 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG FAVORIT 40620. AEG FAVORIT 40620 48 pagina's. Aeg dishwasher

1) (°d) German degree, measure of the hardness of water

2) [mmol/l] millimol per litre, international unit for the hardness of water

3) On this setting the length of the wash programme may be slightly longer.

*) factory setting

Setting the water softener

Using the table as a guide, adjust the water softener to that which cor-

responds to the hardness of the water in your area:

The dishwasher must be switched off.

Setting manually:

1. Open the dishwasher door.

2. Remove the lower basket from the

dishwasher.

3. Turn the hardness range switch to 0

or 1 (see table).

4. Replace the lower basket.

Setting electronically:

1. Press the ON/OFF button.

The ON/OFF button's LED will illuminate.

If other indicators are also illuminated, this means that a wash pro-

gramme has been activated. The wash programme must be deselected

(RESET):

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

All other indicators will go out.

2. Press function buttons 2 and 3 simultaneously and keep them

pressed.

The LED indicators for function buttons 1 to 3 will flash.

3. Press function button 1.

The LED indicator for function button 1 will flash.

The LED indicator for the end of the wash programme will flash simul-

taneously:

– The number of times that the LED indicator for the end of the wash

programme flashes corresponds to the hardness setting.

– This sequence of flashes is repeated many times, with a 3 second

pause in between.

4. Pressing function button 1 increases the hardness setting by 1.

(Exception: hardness setting 1 follows hardness setting 10).

5. When the hardness setting is correct, press the ON/OFF button.

The hardness setting is now saved.

Operating Instructions