Brother MFC-J6510DW Handleiding voor snelle installatie - Pagina 6

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother MFC-J6510DW. Brother MFC-J6510DW 41 pagina's. Quick setup guide - spanish
Ook voor Brother MFC-J6510DW: Specificaties (2 pagina's), Handleiding voor snelle installatie (39 pagina's), Gebruiksaanwijzing (17 pagina's), (Engels) Snelle configuratiegids (41 pagina's)

Unpack the ink cartridge.

Turn the green release lever on the orange

protective packing a clockwise until it clicks to

release the vacuum seal. Then remove the

orange protective packing a as shown.

IMPORTANT

DO NOT shake the ink cartridges. If ink stains

your skin or clothing, wash with soap or

detergent at once.

Take care to match the color of the lever a

with the cartridge color b, as shown in the

diagram below.

Install each ink cartridge in the direction of the

arrow on the label.

1 1

Gently push the back of the ink cartridge

marked "PUSH" until it clicks. After all the ink

cartridges are installed close the ink cartridge

cover.

Note

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.