Brother QL700RF1 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother QL700RF1. Brother QL700RF1 8 pagina's.

Pagina afdrukken

Problem

Cutter error

The printed bar code cannot be

read.

After exiting P-touch Editor Lite,

how do I restart the program

while the machine is still on?

I want to reset the printer.

• If a cutter error occurs, keep the DK roll compartment cover

closed and press the ON/OFF button. The cutter moves back to

the normal position and turns the machine OFF automatically.

After the machine is OFF, inspect the label outlet and remove

the paper jam.

• Set the label vertical to the print head as shown below.

Label exit slot

Print head

• Some types of scanner are not able to read the bar code. Try

using another scanner.

• We recommend printing the Bar code with Print Quality options

set to "Give priority to print quality".

Windows

XP:

To change the Print Quality options, open the printer properties

by going to [Control Panel]-[Printers and Other Hardware]-

[Printer and Faxes], right-clicking the printer whose settings are

to be changed, then selecting [Properties]. Then, in the [General]

tab, click [Printing Preferences...].

Windows Vista

To change the Print Quality options, open the printer properties

by going to [Control Panel]-[Hardware and Sound]-[Printers],

right-clicking the printer whose settings are to be changed, then

selecting [Properties]. Then, in the [General] tab, click [Printing

Preferences...].

Windows

To change the Print Quality options, open the printer properties

by going to

- [Devices and Printers], right-clicking the printer

whose settings are to be changed, and selecting [Printer

properties]. Then, in the [General] tab, click [Preferences...].

Mac OS X 10.4.11 - 10.7:

To change the Print Quality options, open the print dialog box and

choose "Basic" from the print options pop-up menu.

There are three ways to restart. Perform any of the following.

• Turn off the QL printer and then turn it back on.

• Disconnect and then reconnect the USB cable while the printer

is on.

• Launch P-touch Editor Lite from My Computer.

Press and hold the CUT button while holding down the ON/OFF

button when the machine is turned off. When the Editor Lite lamp

starts flashing and the STATUS lamp lights orange, press the

CUT button six times while continuing to hold down the ON/OFF

button. The machine will be reset to factory settings.

Solution

Recommended

print direction