Fujitsu fi-5000N Aan de slag - Pagina 19

Blader online of download pdf Aan de slag voor {categorie_naam} Fujitsu fi-5000N. Fujitsu fi-5000N 29 pagina's. Fujitsu fi-5000n: user guide
Ook voor Fujitsu fi-5000N: Technische specificaties (2 pagina's)

Pagina afdrukken

■ Registering Users

The Administrator can register users on the fi-5000N by

using the fi-5000N Software installed on the Adminis-

trator's PC

New registration of user information

1. From the [Start] menu, select [All Programs] ->

[fi-5000N Software] -> [fi-5000N Configuration

Tool].

2. Select the device name, and click the

[User Config] button.

3. Enter the Administrator PIN (the default setting

is "5000") when you are prompted to enter the

PIN, and click the [OK] button.

⇒

The User Registration screen appears.

4. Select [Add], enter the [User Name], [New PIN],

[Host name/IP address], and click the [Enter]

button.

⇒

The user is registered in the User List.

5. To register more users, repeat Step 4.

6. Click the [Close] button.

Now the users are registered on fi-5000N.

■ Configuring Scanner Settings

The User can configure the scan settings using the

fi-5000N Software and the scanning software installed

on the user's PC.

Configuring Settings on fi-5000N

Software

The fi-5000N Software specifies the application that

starts when the button on the scanner is pressed.

(As an example here, ScandAll 21 is configured to start

when the [Scan] button on the scanner is pressed.)

1. From the [Start] menu, select [All Programs] ->

[fi-5000N Software] -> [fi-5000N Configuration

Tool].

2. Select the fi-5000N unit name, and click the

[Launch Option] tab.

3. Configure the application to start when the

following screen appears.

Button:

Selects the configured button

from "Scan" and "Send To 1 ~

Send To 9".

("Scan" is selected here)

(Depending on the selected

button, nothing would occur if

the [Target], [Argument], or

[Start in] are not specified.)

fi-5000N Getting Started