Brother HL-6180DWT Handmatig - Pagina 26

Blader online of download pdf Handmatig voor {categorie_naam} Brother HL-6180DWT. Brother HL-6180DWT 30 pagina's. Wi-fi direct guide - english
Ook voor Brother HL-6180DWT: Handleiding voor snelle installatie (35 pagina's), Handleiding voor snelle installatie (35 pagina's), Handleiding productveiligheid (23 pagina's)

Pagina afdrukken

Troubleshooting

Error messages when configuring Wi-Fi Direct from the control panel menu (continued)

Error Message

(For HL-5470DW(T)

and HL-6180DW(T))

Cannot Connect

A device is

already connected.

(For MFC-8710DW and

MFC-8910DW)

A device is

already connected.

Press OK

(For MFC-8950DW(T))

A device is

already connected.

Press OK.

I cannot complete the Wi-Fi Direct network setup configuration.

Question

Are your security settings

(SSID/password) correct?

Is your Brother machine

placed too far from your

mobile device?

Are there any obstructions

(walls or furniture, for

example) between your

machine and the mobile

device?

Is there a wireless computer,

Bluetooth supported device,

microwave oven or digital

cordless phone near the

Brother machine or the mobile

device?

Cause

Another mobile device is already connected

to the Wi-Fi Direct network when the

Brother machine is the G/O (Group Owner).

Solution



Reconfirm the SSID and password.

If you are using your machine as a G/O (Group Owner) in manual configuration,

the SSID and password are displayed on the machine's control panel during the

configuration procedure.

If you are using your mobile device as a G/O (Group Owner) in manual

configuration, the SSID and password are displayed on the mobile device's

screen during the configuration procedure.

For information on what the SSID name is, see SSID uu page 26.



Move your Brother machine within about 3.3 feet (1 meter) from the mobile device

when you configure the Wi-Fi Direct network settings.

Move your Brother machine to an obstruction-free area.

Move other devices away from the Brother machine or the mobile device.

Action

After the current connection between your

Brother machine and another mobile device

has shut down, try and configure the Wi-Fi

Direct settings again. You can confirm the

connection status by printing the Network

Configuration Report uu Network User's

Guide: Printing the Network Configuration

Report.