Fujitsu Eternus DX90 S2 Gebruikershandleiding - Pagina 24

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 35 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX90 S2: Gebruikershandleiding (42 pagina's), Handmatig (18 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Hardware-installatie (23 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's), Configuratiehandleiding (38 pagina's)

Chapter 7

Installing Drivers and Setting Up the Server

Install the Fibre Channel Card driver, and then set up the server environment.

Refer to "ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux Driver

Settings for Non-Fujitsu Fibre Channel Cards" for detailed setting procedures.

•

When Emulex Fibre Channel cards or Fujitsu Emulex Fibre Channel cards are used, refer to the "Operations

When Using Emulex Fibre Channel Cards" chapter.

When QLogic Fibre Channel cards or Fujitsu QLogic Fibre Channel cards are used, refer to the "Operations

•

When Using QLogic Fibre Channel Cards" chapter.

When Brocade Fibre Channel cards are used, refer to the "Operations When Using Brocade Fibre Channel

•

Cards" chapter.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux

P3AM-3842-12ENZ0