Fujitsu ETERNUS LT260 Gebruikershandleiding - Pagina 19
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu ETERNUS LT260. Fujitsu ETERNUS LT260 44 pagina's. Tape library
Ook voor Fujitsu ETERNUS LT260: Snelstarthandleiding (5 pagina's)
Pagina afdrukken
Chapter 2 LT260 Installation
2.2 Installation Area
2.2.1
Location Requirements
•
The library was designed for rack installation and must be installed using the provided rack rails.
Installation on a table top or other similar surface could result in library operation errors.
•
The library is a heavy load. Please note the height of the installing position so that the rack should not
fall by weight.
•
Select a rack with access to the host server.
•
Choose a location that meets the criteria in
Table 2.2
Location requirements
Criteria
Rack requirements
Rack space
requirements
Room temperature
Power source
Air quality
Humidity
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Table
Standard 19-inch rack with an appropriate # of U's (Rack Units) of clearance for the planned
module quantity
6U for the Base Module and 6U for the Expansion Module
10-35º C (50-95º F)
•
AC Power Voltage: 100-240 VAC
•
Frequency: 50/60 Hz
•
Library Located near AC Outlet(s)
The AC power cord is the library's main AC disconnect device and must be easily removable
at all times.
•
Place the library in an area with minimal sources of particulate contamination
•
Avoid areas near frequently used doors and walkways, stacks of supplies that collect
dust, printers, and smoke-filled rooms
•
Excessive dust and debris can damage tapes and tape drive
20-80 percent RH non-condensing
19
Copyright 2018 FUJITSU LIMITED
2.2.
Definition
P3AM-8782-06ENZ0