Brother Quattro 6000D Bedieningshandleiding - Pagina 20

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Brother Quattro 6000D. Brother Quattro 6000D 21 pagina's. Kit de actualización iii
Ook voor Brother Quattro 6000D: Handmatig (42 pagina's), Bedieningshandleiding (50 pagina's), Bedieningshandleiding (6 pagina's), Gebruikershandleiding (48 pagina's), Bedieningshandleiding (29 pagina's), (Engels) Gebruiksaanwijzing (49 pagina's), (Engels) Gebruiksaanwijzing (21 pagina's), (Engels) Gebruiksaanwijzing (48 pagina's)

■ 3D combination motifs

XKIT2B07.pes

How to make 3D combination motifs

1. Use the same color of thread in the bobbin and on top for the designs.

2. Embroider individual shapes. When sections are completed they are joined to make dimensional shapes. Use a

thread or narrow ribbon of a complimentary color to join them.

3. Turn off the "Jump stitch thread cutting function" before embroidering. (Refer to the Operation Manual for

directions on how to do this.)

The following are things you should be aware of when using water-soluble sheets without any fabric. When

embroidering these designs, please use three layers of water-soluble sheets.

Remember to check that you have enough upper thread and lower thread for the design. If the thread breaks during

embroidery, back up at least 10 stitches before starting again. If your embroidery machine has a speed reduction

feature, select the lowest speed. When dissolving the water-soluble sheet, cut off the unnecessary portions and wash

the embroidered piece in warm water until it no longer feels slippery. After the final rinse, dry the embroidery motif

until slightly damp, shape by hand or with a cool iron, allow to dry completely.

■ Examples of Combinations

XKIT2B08.pes × 2

XKIT2B09.pes × 4

XKIT2B10.pes × 4