Brother RJ-4250WB Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Brother RJ-4250WB. Brother RJ-4250WB 2 pagina's.
Ook voor Brother RJ-4250WB: Handmatig (2 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken

Connect your device

Mobile (Bluetooth)

▼

Windows

Visit install.brother and download the latest Software/Documentation Installer.

Bundled items and accessories

Belt Clip (Bundled)

Use to carry the printer on your belt.

Shoulder Strap (Accessory)

Use to put the printer on your shoulder.

LED indicators

LED indicator

Status

Unlit

• Power off

• Charging complete (when power is turned off)

Green

• Battery level: Half or more

• Charging complete (when power is turned on)

Orange

Charging

Red

Boot mode

Green (flashing)

Sleep mode

Orange (flashing)

Battery level: low

Red (flashing)

• Any error

• Battery level: empty

NFC

* Android™ only

Troubleshooting

The printer does not print, or there is a printing error.

The printer does not feed paper.

The LED indicator or the LCD is not lit.

Printed paper contains streaks or poor quality characters,

or paper is not fed correctly.

Mobile (Wi-Fi)

Serial number

Problem

■ Is the cable loose?

Check that the cable is connected securely.

■ Is the roll installed correctly?

If not, remove the roll and reinstall.

■ Is there enough roll remaining?

If not, install a new roll.

■ Is the roll compartment cover open?

Check that the roll compartment cover is closed.

■ Has a print error or transmission error occurred?

Turn off the printer and on again. If the problem still occurs, contact your Brother dealer.

■ Is there dirt or lint on the roller preventing it from rolling freely? Clean the roller.

■ Check that the ejection path of the paper is not blocked.

■ Check that the roll is set correctly by removing the roll and installing it again.

■ Ensure that the roll compartment cover is closed correctly.

■ Is the battery inserted correctly?

Check that the battery is inserted correctly. If it is, check that the battery has sufficient charge remaining.

■ Is the adapter cord connected properly?

Check that the cord is connected correctly.

■ If the LED indicator or the LCD still does not light up, contact your Brother dealer.

■ Is the print head or roller dirty?

Although the print head generally remains clean under normal use, lint or dirt from the roller may become stuck on the printer head. If this occurs,

clean the roller.

▼

SER.NO.

Solution