Indesit LFT 114 UK Servicehandleiding - Pagina 14

Blader online of download pdf Servicehandleiding voor {categorie_naam} Indesit LFT 114 UK. Indesit LFT 114 UK 26 pagina's. Platform eos. built in

CHAPTER 5: COMPONENTS

The Base:

The base is in plastic and contains all the functional-parts of the dishwasher as well as acting as support for the wash-basin.

Built-in dishwashers are provided with three legs that are for the purpose of levelling out the machine: two are on the fore-front

and one at the back in the middle of the machine which is equipped with an adjustable-nut.

One of the advantages provided by the new type of base is that it facilitates access to the motor-room from the front-door

opening via two locking-hooks.

The small Basin placed under the dishwasher, may be removed by unfastening further two hooks and extracting it towards the

front part of the machine.

NB: Should the hooks that lock the front-door of the base or the basin be damaged, the base has been equipped with

self-rivetting screws, which will seal the components well and so avoid having to replace the entire base.

Adjustable Legs:

Three legs serve to adjust the height of the machine and to level it out horizontally. The front-panels must be adjusted directly by

the leg. The back-leg of the dishwasher may be adjusted by means of a hexagonal screw placed in the middle front part of the

machine, under the connecting Hardware-key hole.

"Synchro-Motorpump":

Introduced on machines in the low range. Available in two versions: one on LVS for U.K.(that works with 220/240 volts); and the

second for the Italian market and the rest of the world. (tnsion between 220/230 volts).

Muff or Junction

On low-range machines, the alternate-washing motor has not been envisaged, but simply a water-distributer which supplies the

water to both syphons simultaneously.

Water Heater:

The water-heater has been mounted on the Archimedian water-pump.To disconnect or replace the water-heater, one needs only

to rotate the Water-heater/motor in an anti-clockwise direction and to pull it out.

The "O-Ring" seves to prevent any water-leakages from taking place; so care must be taken when fixing it back into place again

and it must often be checked for water-leakages.

Airbreak:

The Airbreak is placed on the left-hand side of the machine and its functions are:

1.To prevent the water from going back into the water-supply system once it has entered the machine.

2.Airbreak (venthole)

3.To allow at least 3% unsweentened water to be introduced which will prevent excessive formation of foam.

4.To contain the Turbine Litre-count

As compared to the former one, this Airbreak does not store any water. It must be remembered that the regeneration-cycle of the

resines on this model, differs to the previous one.

Service Manual

Manual LFT 114 - 116 - 216

Edition

2007.10.15

Language

English