AEG 502 D Bedienings- en installatie-instructies - Pagina 10
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} AEG 502 D. AEG 502 D 20 pagina's. Electrolux extractor hood installation and operating instructions
Ook voor AEG 502 D: Handleiding voor installatie en gebruik (16 pagina's)
Pagina afdrukken
Fixing
After having adjusted the hood for the version required, it may be
installed.
the hood
This appliance is designed for fitting in a cabinet or some other
support.
The opening to be made on the bottom of the wall-hung cabinet
must correspond with the measurements shown in fig. 4
(495 X 260 mm).
To fix the hood proceed as follows:
a) remove the grid.
b) Fit the hood into the opening.
c) Secure the unit to the cabinet by screwing up screws through
holes C (fig. 4).
d) Replace the grid.
C
C
4
10