Kohler Bancroft K-2347-1 Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Kohler Bancroft K-2347-1. Kohler Bancroft K-2347-1 16 pagina's. Pedestal lavatory

Pagina afdrukken

Hanger

Bolts

Mark Anchoring

Holes.

2. Install the Lavatory

Drill 1/4" mounting holes at the marked locations on the ﬁnished

wall and the ﬂoor.

NOTE: You can also use other fastening devices of sufficient size

and strength.

Install the hanger bolts to the backing material so they extend 1"

(2.5 cm) between the cap nut and the ﬁnished wall.

Install the faucet and drain to the lavatory according to the

manufacturer's instructions.

Move the pedestal over the drilled hole in the ﬂoor, and secure

the pedestal to the ﬂoor by carefully tightening the wood screw

and washer.

Carefully set the lavatory on the pedestal so the hanger bolts

extend through the lavatory anchoring holes.

CAUTION: Risk of product damage. Do not overtighten the cap

nuts. Overtightening may damage the product.

Install the cap nuts and washers to the hanger bolts. Check the

level of the lavatory, and carefully tighten the cap nuts until snug.

Connect and tighten the trap to the drain, and complete the water

supply connections to the faucet according to the instructions

packed with the faucet.

Kohler Co.

Install Faucet

and Drain.

Finished Wall

Apply Adhesive

Gaskets.

Pedestal and Lavatory Placement

Washer

Cap Nut

Pedestal

1037520-2-A