Kohler BELAY K-156T-RCP Handleiding voor installatie-instructies - Pagina 18
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Kohler BELAY K-156T-RCP. Kohler BELAY K-156T-RCP 23 pagina's.
Pagina afdrukken
CARE AND CLEANING
For best results, keep the following in mind when caring
for your KOHLER bath:
·
Always test your cleaning solution on an
inconspicuous area before applying to the entire
surface.
·
Wipe surfaces clean and rinse completely with water
immediately after applying cleaner. Rinse and dry
any overspray that lands on nearby surfaces.
·
Do not allow cleaners to soak on surfaces.
·
Use a soft, dampened sponge or cloth. Never use
an abrasive material such as a brush or scouring
pad to clean surfaces.
·
The ideal cleaning technique is to rinse thoroughly
and blot dry any water from the surface after each
use.
·
Use a soft nylon brush on slip-resistant surfaces. Be
sure to use a water-soluble cleaner (dissolves 100%
in water).
·
Do not use powdered cleaners unless the cleaner is
fully dissolved in water. Solid substances can block
the airjets.
·
Do not use full strength bleach or ammonia cleaning
solutions. Chemically active cleaning solutions can
damage the surface.
·
Do not use abrasive cleansers or solvents on airjet
surfaces. Abrasive cleaners and solvents can
damage the airjet surface.
Maintaining the Airjets
·
If cleaning the airjets is necessary due to hard water
deposits, wet a soft, non-abrasive cloth with white
vinegar and wipe the plugged airjet holes.
Immediately rinse the area with clean water to avoid
long-term exposure of the vinegar to the airjet
surface.
·
Fill the bath with water to the top row of airjets.
Drain the bath, and press the air system button to
purge retained water from the air system. Press the
air switch button three more times to turn off the air
system.
1397340-T01-A
·
·
·
·
·
·
·
·
·
·
·
-18-
100%