Kohler VINTAGE K-700 Installatie- en onderhoudshandleiding - Pagina 5
Blader online of download pdf Installatie- en onderhoudshandleiding voor {categorie_naam} Kohler VINTAGE K-700. Kohler VINTAGE K-700 25 pagina's. Roughing-in guide
Ook voor Kohler VINTAGE K-700: Handleiding voor installatie-instructies (9 pagina's), Installatiehandleiding (21 pagina's), Inloophandleiding (4 pagina's), Handmatig (4 pagina's)
Pagina afdrukken
1.
Prepare the Site
Drop-In or Raised-Deck Installations
Installations encastrées ou sur podium.
Instalaciones de sobreponer o en cubierta elevada
Provide a 1/16" (2 mm) gap between the bath rim
and the framing.
Fournir un espace de 1/16" (2 mm) entre le rebord
de la baignoire et le cadrage.
Provea una separación de 1/16" (2 mm) entre el
borde de la bañera y la estructura de postes de
madera.
Flooring
NOTICE: Adequate floor support must be provided. Consult the rough-in guide
packed with the bath for specific floor loading requirements.
Install adequate floor support.
NOTICE: To ensure a successful installation, it is critical that the bath be installed on
a level subfloor.
Verify the subfloor is level. Adjust for level, if necessary.
For freestanding installations, apply water-resistant sealant to the subfloor. This
will reduce the risk of water damage.
Framing
For drop-in or raised-deck installations:
CAUTION: Risk of property damage. Do not support the bath by the rim. The
bath must be supported by the feet only.
NOTICE: To ensure the bath does not rest on the rim, a 1/16" (2 mm) gap must exist
between the underside of the rim and the framing. When constructing the framing,
take into account the 1/16" (2 mm) gap and the thickness of the finished wall/deck
material. If these factors are not taken into account, the bath will not fit in the
installation area.
Construct the framing according to the roughing-in information packed with the
bath. Ensure a 1/16" (2 mm) gap will exist between the underside of the rim and
the framing.
Kohler Co.
5
1084188-2-A