Kohler Innate K-8340TW-2EX-0 Handleiding voor huiseigenaren - Pagina 21
Blader online of download pdf Handleiding voor huiseigenaren voor {categorie_naam} Kohler Innate K-8340TW-2EX-0. Kohler Innate K-8340TW-2EX-0 47 pagina's. Intelligent toilet
Pagina afdrukken
. Maintenance in case of long-term idle status
D
a) If the intelligent toilet will be idle for a long term, make sure the water in pipeline of cover is drained completely:
Disconnect the power supply, and press water discharge button inside the small hole inside the heating
pipe to discharge the residual water.
Pull the plug
Press pneumatic switch to discharge residual water inside the water tank.
Note:
1. If water is not completely drained and meanwhile the product is idle for a long time, the residual water may
freeze in winter or spoiled in summer.
2.
If you find the water supply pipe has been frozen, do not use the intelligent cover. You will need to raise the
room temperature and use it after the water is thawed.
3.
When the winter temperature exceeds the normal working temperature, and there is a risk of freezing in water
pipe, please turn off the tee valve and perform one flush/or discharge the toilet.
4. Before use after long term idle condition, please close the tee valve and then press it again for flushing.
5. When use after long term idle status, make sure to flush it for several times and the inner pipelines are clean.
6. In case of long term idle status, remove the batteries in the charging block of remote control.
b) Open cover or add water inside the toilet might avoid the plastic parts yellowing problem caused by backfl
air from discharge pipe after residual toilet water evaporated during long-term idle status.
Kohler Co.
switch
button
21
Pnuematic switch
1408701-TW01-B