AVPro Edge AC-CXWP-MDP-70KIT Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} AVPro Edge AC-CXWP-MDP-70KIT. AVPro Edge AC-CXWP-MDP-70KIT 4 pagina's.

When using projectors RGB is recommended.

Copying EDID From Output:

With 70-Kits

•

Connect category to TX/RX, HDMI to Display, and both RX and Display

are powered

•

Turn dial to F on wall plate

With 100-Kits

•

Connect category to TX/RX, HDMI to Display, and both RX and Display

have power

•

Turn dial to F on RX

Troubleshooting:

Having problems? Here are some general troubleshooting tips that may help:

(We recomend every integrator have the fox & hound troubleshooting kit. That way you

have a definitive answer when having problems with HDMI)

1. Try different HDMI cables. A defective HDMI cable can bring the entire system down.

2. If using short HDMI cables (.5m, 1m) try a longer cable. Some short HDMI cables do not

sync well.

3. Ensure you have the correct EDID settings selected.

4. Re-terminate the Category cable (even if a cable tester indicates that the cable is passing

signal).

5. Avoid RJ45EZ connectors

6. Check the Category cable length. It may be too long.

7. Remove any excess Category cable and be sure that it is not twisted or damaged.

8. If you are still having issues after troubleshooting, feel free to contact our Tech

Support department.

Have a question or need assistance?

Don't hesitate to contact us!

SUPPORT: +1 605-274-6055

USA TOLL FREE: 877-886-5112