AVProConnect AC-EX70-UHD-KIT Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AVProConnect AC-EX70-UHD-KIT. AVProConnect AC-EX70-UHD-KIT 12 pagina's. 4k hdmi 2.0 extender with hdcp 2.2
Pagina afdrukkenAC-EX70-UHD
RS-232 Configuration
■
IR Configuration
■
IR can be used in 3 ways:
1. From Rack: Use an IR Sensor on the AC-EX70-UHD Transmitter (IR
In Port) to send IR Signals to the remote end (Receiver) and come
out of the IR Out Port with an emitter.
2. From Remote End: Use and IR Sensor on the AC-EX70-UHD
Receiver (IR In Port) and sen IR Signals BACK to the rack and come
out of the TRANSMITTER IR Out Port with an emitter.
3. Control System Direct: Plug an MONO 3.5mm cable into an emitter
port of any control system directly into the "I-PASS" Port on the AC-
EX70-UHD Transmitter to send pass IR Signals directly to the remote
end.
9