Dell Force10 S2410-01-10GE-24P Handmatig - Pagina 19
Blader online of download pdf Handmatig voor {categorie_naam} Dell Force10 S2410-01-10GE-24P. Dell Force10 S2410-01-10GE-24P 42 pagina's. Installing the s2410 system
Ook voor Dell Force10 S2410-01-10GE-24P: Toepassingsnotitie (6 pagina's), Snelstarthandleiding (31 pagina's)
Pagina afdrukken
Four-Post Rack-mounting with Cage Nuts
Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If
you are installing two S2410 systems side-by-side, position them at least 5 inches (12.7 cm) apart.
Attach the rack ears first, using only the supplied screws (see
then follow the steps below to install the S2410 chassis into a four-post rack mounting with cage nuts.
Step
Task
Attach the two rear brackets to the side panels. Align the three holes in the bracket with the three holes on the
1
S2410 chassis, and secure the brackets to the chassis using the screws.
Figure 4-6. Four-post Rack-mounting with Cage Nuts, Step 1
Align and secure the adjustable bracket onto the rear bracket.
2
Insert the S2410 chassis into the rear of the rack. Position and secure the chassis with two screws into each front
3
bracket flange and into the rack post.
Figure 4-7. Four-post Rack-mounting with Cage Nuts, Step 3
Attaching the Rack Ears on page
Top View of Brackets
15), and
Align brackets
Installing the S2410
|
19