Dell P570 Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell P570. Dell P570 35 pagina's.
Ook voor Dell P570: Gebruikershandleiding (37 pagina's), Gebruikershandleiding (35 pagina's)
Pagina afdrukken
Table 8. Features available on the back view (continued)
Item
Panels, ports and slots
11
VxRail identification
button
NIC indicator codes
Each NIC on the back panel has indicators that provide information about the activity and link status. The activity LED indicator
indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 10. NIC indicator codes
1. link LED indicator
2. activity LED indicator
Table 9. NIC indicator codes
Status
Link and activity indicators are off
Link indicator is green and activity indicator is blinking
green
Link indicator is amber and activity indicator is blinking
green
Link indicator is green and activity indicator is off
Link indicator is amber and activity indicator is off
Link indicator is blinking green and activity is off
Power supply unit indicator codes
AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator and DC PSUs have an LED that
serves as an indicator. The indicator shows whether power is present or a power fault has occurred.
16
VxRail overview
Icon
Description
The VxRail Identification (ID) button is available on the front and
back of the VxRail. Press the button to identify an VxRail in a rack
by turning on the VxRail ID button. You can also use the VxRail ID
button to reset iDRAC and to access BIOS using the step through
mode.
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its maximum port speed
and data is being sent or received.
The NIC is connected to a valid network at less than its maximum
port speed and data is being sent or received.
The NIC is connected to a valid network at its maximum port speed
and data is not being sent or received.
The NIC is connected to a valid network at less than its maximum
port speed and data is not being sent or received.
NIC identify is enabled through the NIC configuration utility.