Dell PowerEdge 2410 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Dell PowerEdge 2410. Dell PowerEdge 2410 11 pagina's. Cabling poweredge t610
Ook voor Dell PowerEdge 2410: Handmatig (20 pagina's), Handmatig (20 pagina's), Handmatig (17 pagina's), Handmatig (12 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's), Handmatig (9 pagina's), Handmatig (9 pagina's), Handmatig (10 pagina's), Handmatig (12 pagina's), Handmatig (8 pagina's)

Pagina afdrukken

Cable Routing Procedures for Dell™ PowerEdge™ R515 Systems

Figure 6: Right-Side Mounted CMA Installation

KVM dongle placed outside the basket

for Right-Side Mounting.

Section 2: Cabling a Dell™ PowerEdge™ R515 System Without a CMA

NOTE: The CMA on Dell™ PowerEdge™ R515 systems is optional. Without the CMA installed, the

system must be powered down and all cables disconnected before it can be removed from the rack.

2.1 Routing the Cables

Connect all applicable cables to the rear of the system and verify that all connections are secure.

2. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to

either the left or right CMA attachment brackets as described in the

See Figure 7 for an example of data cables secured to the left CMA bracket and power cables

secured to the right CMA bracket.

It is recommended that the cables be secured to the outer brackets, but cables may be secured to

the inner brackets as well if desired.

Rack Installation Instructions

Page 6