Dell PowerEdge M910 Aan de slag handleiding - Pagina 3

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Dell PowerEdge M910. Dell PowerEdge M910 12 pagina's. M-series blade servers
Ook voor Dell PowerEdge M910: Handleiding bijwerken (44 pagina's), Handleiding bijwerken (21 pagina's), Handleiding bijwerken (14 pagina's), Installatiehandleiding (7 pagina's), Handleiding bijwerken (28 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (46 pagina's), Portfolio Handleiding (27 pagina's), Technisch handboek (45 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (12 pagina's), Technisch handboek (49 pagina's)

Installation And Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the blade

server or enclosure.

Unpack your blade server or enclosure and identify each item.

Installing The Rails And Enclosure

Figure 1. Installing the Enclosure in the Rack

Assemble the rails and install the enclosure in the rack, following the safety instructions and the rack installation

instructions provided with the enclosure.

Installing A Sleeve In The Enclosure

NOTE: This procedure applies only to PowerEdge M420.

A sleeve includes up to four quarter-height blades to function as a system. Depending on your order, the sleeve may

ship with the blades preinstalled.

CAUTION: Exercise utmost care when installing or removing the sleeve to prevent damage to the internal

components. To ensure protection for the electronic components inside, follow the Electrostatic Discharge (ESD)

guidelines.