Dell E2222H Servicehandleiding - Pagina 9

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell E2222H. Dell E2222H 15 pagina's. Teardown instruction
Ook voor Dell E2222H: Gebruikershandleiding (49 pagina's), Vereenvoudigde onderhoudshandleiding (12 pagina's), Servicehandleiding (15 pagina's), Instructies (3 pagina's)

Take out 1pcs panel assembled module with front

bezel and function key board from the carton, and

then examine the panel surface according to

inspection criteria. Turn over the panel, and then

place screen faced down for later assembling.

Move the bracket close to the panel, then use a

proper tool to connect LVDS cable to the connector

of the panel.

Adjust the bracket chassis to the correct position,

then use a Philips-head screwdriver to tighten 2pcs

screws for locking the bracket with panel module.

Use a Hex-head screwdriver to lock 2pcs screws for

locking the VGA connector.

(No.1~2 screw size=M3x4, Torque=5 0.5kgfxcm;

No.3~4 screw size=M3x8, Torque=6

5. Disassembly and Assembly Procedures

kgfxcm)

±0.5

Connect the panel lamp cable to the connector of

S10

the panel module, then fix the panel lamp cable with

1pcs aluminum foil as the picture below shown.

Connect the function key cable to the connector of

board, then tear off the 3pcs double-faced tape on

S11

the back of the back and fix the cable on the bracket

as the picture below shown.