Dell PowerEdge 5160 Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerEdge 5160. Dell PowerEdge 5160 28 pagina's. Installing the external drive bay
Ook voor Dell PowerEdge 5160: Installatiehandleiding (42 pagina's), Installatiehandleiding (20 pagina's), Handleiding bijwerken (8 pagina's), Informatie-update (8 pagina's), Gebruikershandleiding (42 pagina's), Installatie rek (34 pagina's), Hardware installatiehandleiding (40 pagina's), Installatiehandleiding (36 pagina's)

1-4

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Removing the Doors From a 24-U or 42-U Rack

You must remove the doors from the rack to provide access to the interior of the

rack and to prevent damage to the doors while installing the kit. To remove the doors,

perform the following steps.

CAUTION: To prevent personal injury due to the size and weight of the

doors, never attempt to remove the doors by yourself.

Open the latch on the front door (see Figure 1-2).

Slide the latch's push-button cover up as far as it will go, press the push button,

rotate the handle clockwise until the latch releases, and then pull the door open.

Remove the front door of the rack.

If you have a 42-unit (U [1.75 inches]) rack, perform the following steps

(see Figure 1-3):

One person should grasp the top of the door to stabilize it. The other person

should grasp the bottom of the door.

The person holding the bottom of the door should press the release lever on

the bottom hinge and then pull the bottom of the door away from the rack a

few inches.

The person holding the top of the door should press the release lever on the

top hinge and then pull the door away from the rack.

push-button

cover

push button

handle