Dell Force10 C150 Snelstarthandleiding - Pagina 28

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dell Force10 C150. Dell Force10 C150 33 pagina's. Quick start guide

Task

Configure an IPv4 or IPv6

management route to the

network from which you

are accessing the system.

Configure a Username and Password

Configure a system username and password to access the system remotely.

Task

Configure a username

and password to

access the system

remotely.

The EXEC Privilege mode is accessed by the enable command. Configure a

password as a basic security measure. When using a console connection, EXEC

Privilege mode is unrestricted by default; it cannot be reached by a VTY

connection if no password is configured. There are two types of enable

passwords:

•

enable password stores the password in the running/startup configuration

using a DES encryption method.

•

enable secret is stored in the running/startup configuration by using a

stronger, MD5 encryption method.

Dell Force10 recommends using the enable secret password.

Task

Create a password to

access EXEC

Privilege mode.

Installing the Software

Command Syntax

management route {ipv4-address

| ipv6-address}/mask gateway

Command Syntax

username username password

[encryption-type] password

Command Syntax

enable [password | secret] [level level]

[encryption-type] password

Command Mode

CONFIGURATION

Command Mode

CONFIGURATION

Command Mode

CONFIGURATION