Dell Force10 Software Defined Networking Uitrolhandleiding - Pagina 30

Blader online of download pdf Uitrolhandleiding voor {categorie_naam} Dell Force10 Software Defined Networking. Dell Force10 Software Defined Networking 36 pagina's. Z series software-defined networking (sdn) deployment guide version 1.0

Pagina afdrukken

flow-map

Specify if flows installed by the controller should be interpreted by the switch for placement in L2 or L3 tables.

Z-Series, S4810

Syntax

flow-map {l2|l3} enable

Parameter

Defaults

None (not enabled)

Command Modes

OPENFLOW INSTANCE

Command History

Version 9.1(0.0)

Usage

L2 flow-mapping is not supported on OpenFlow instances with an interface-type of "port."

Information

openflow of-instance

Commands

interface-type

Specify the type of interface (port, VLAN, or any) for the OpenFlow instance.

Z-Series, S4810

Syntax

interface-type {any|port|vlan}

Defaults

port

Parameter

any

port

vlan

Command Modes

OPENFLOW INSTANCE

Command History

Version 9.1(0.0)

Enter l2 to interpret Layer 2 flows.

Enter l3 to interpret Layer 3 flows.

Introduced on Z9000 and S4810.

Create or modify an OpenFlow instance.

any to enable configuration of physical interfaces,

Enter the keyword

LAGs, and VLANs on the selected OF instance.

Default. Enter the keyword

port to enable configuration of LAGs or

physical interfaces on the selected OF instance.

vlan to enable configuration of VLANs on the

Enter the keyword

selected OF instance.

NOTE: You must associate the OF instance with the VLAN when

the VLAN is created.

Introduced on Z9000 and S4810.