Dell Force10 Software Defined Networking Uitrolhandleiding - Pagina 5

Blader online of download pdf Uitrolhandleiding voor {categorie_naam} Dell Force10 Software Defined Networking. Dell Force10 Software Defined Networking 36 pagina's. Z series software-defined networking (sdn) deployment guide version 1.0

Pagina afdrukken

OpenFlow 1.0 Support

OpenFlow (OF) 1.0 [STD-1] is supported on the S4810 and Z9000 platforms.

Unsupported OpenFlow Messages

The following section provides a list of OpenFlow messages that are not supported.

Table 1. Unsupported OpenFlow Messages

Message

OFPT_SET_CONFIG

OFPT_QUEUE_GET_CONFIG_REQUEST

OFPT_PORT_MOD

Emergency Flows (OFPFF_EMERG)

Queue Statistics (OFPST_QUEUE)

For supported flow-match and flow action parameters for each flow type, refer to FlowTypes.

The following section provides a list of actions that are not supported for any flow types. All of the following commands

generate an OFPT_ERROR message.

•

OFPAT_STRIP_VLAN

•

OFPAT_SET_NW_SRC (set src-ip)

•

OFPAT_SET_NW_DST (set dst-ip)

•

OFPAT_SET_TP_SRC (set tcp/udp src-port)

•

OFPAT_SET_TP_DST (set tcp/udp dst-port)

•

OFPAT_ENQUEUE

•

OFPAT_OUTPUT to OFPP_IN_PORT

•

OFPAT_OUTPUT to OFPP_TABLE

•

OFPAT_OUTPUT to OFPP_NORMAL

•

OFPAT_OUTPUT to OFPP_LOCAL

Limitations

•

OFPAT_OUTPUT to OFPP_FLOOD and OFPP_ALL are supported on the S4810 only. These commands are

not currently supported on Z9000.

•

Multiple output ports are supported on S4810 only. Multiple output ports are not currently supported on Z9000.

•

The set/modify actions must precede the "output ports" actions. This means that the switch cannot transmit

different copies if you specify multiple output ports.

System Response

This message is ignored by the switch.

OFPT_ERROR is generated in response.