Dell S3048-ON Handleiding voor probleemoplossing - Pagina 10

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Dell S3048-ON. Dell S3048-ON 29 pagina's. Enterprise switches

Pagina afdrukken

Dell S3048-ON Handleiding voor probleemoplossing

Erasing block: 128/128 (100%)

Writing kb: 16376/16384 (99%)

Verifying kb: 16376/16384 (99%)

ONIE:/ # umount: can't remount rootfs read-only

The system is going down NOW!

Sent SIGTERM to all processes

Sent SIGKILL toRestarting system.

Reset via the platform CPLD

Start ONIE diagnostics. To start the ONIE diagnostics for the S6000–ON, use the onie-diag option from the ONIE menu. To start

the ONIE diagnostics for the S4810–ON, use the following procedure:

Set the u-boot environment onie_boot reason using ONIE:/ # onie-set-env onie_boot_reason diag from the

ONIE # prompt or using dell_s4810_on > setenv onie_boot_reason diag from the u-boot prompt.

b Reboot the system to launch and run the ONIE diagnostics.

Platform specific diag found and launching.....

*****************************

Diagnostics Application

*****************************

Dell Diag ./edatool version x.x, package x.x 2014/7/23

Dell Diag ./fantool - version x.x package x.x 2014/7/23

Dell Diag ./gpiotool - version x.x package x.x 2014/7/23

Dell Diag ./i2ctool - version x.x package x.x 2014/7/23

Dell Diag ./memtool - version x.x package x.x 2014/7/23

Dell Diag ./nvramtool - version x.x package x.x 2014/7/23

Dell Diag ./pcitool - version x.x package x.x 2014/7/23

Dell Diag ./pltool - version x.x package x.x 2014/7/23

Dell Diag ./psutool - version x.x package x.x 2014/7/23

Dell Diag ./temptool - version x.x package x.x 2014/7/23

Testing PCI devices:

+ Checking PCI 00:00.0, ID=57197000 ....................... Passed

+ Checking PCI 01:00.0, ID=e41445b8 ....................... Passed

PCI devices: Overall test results --------------------- >>> Passed

Testing I2C devices:

Checking I2C devices on bus 0:

+ Checking Dev found @ 0x52 ...

+ Checking Dev found @ 0x54 ...

+ Checking Dev found @ 0x55 ...

+ Checking Dev found @ 0x56 ...

+ Checking Dev found @ 0x57 ...

+ Checking Dev found @ 0x68 ...

Checking I2C devices on bus 1:

+ Checking Dev found @ 0x40 ...

+ Checking Dev found @ 0x42 ...

+ Checking Dev found @ 0x49 ...

+ Checking Dev found @ 0x4a ...

+ Checking Dev found @ 0x4c ...

+ Checking Dev found @ 0x4d ...

Checking I2C devices on bus 2:

I2C Devices: Overall test results --------------------- >>> Passed

Testing Programmable Devices:

PL Tool test:

+ Checking

System CPLD

+ Checking

System CPLD

PL Tool: Overall test results ------------------------- >>> Passed

Power Supply Test all

Power Supply 1 ............................................ Passed

Power Supply 2 is not present

Power Supply Test ......................................... Passed

Testing Temp sensor

+ Checking [CPU sensor]

+ Checking [MAC sensor]

+ Checking [Phy Right sensor]

+ Checking [Phy Left sensor]

Temp Sensors: Overall test results -------------------- >>> Passed

Fan Controller Short Test ................................. Passed

Fan 1

speed is 12240 RPM

Fan 2

speed is 12240 RPM

ONIE diagnostics

------

0xffdf0000 Reg: 0x10 .................... Passed

0xffdf0000 Reg: 0xa0 .................... Passed

devices:

= 38.0 C ....................... Passed

= 43.0 C ....................... Passed

= 39.0 C ....................... Passed

= 40.0 C ....................... Passed

------ 0x52

..... Passed

------ 0x54

..... Passed

------ 0x55

..... Passed

------ 0x56

..... Passed

------ 0x57

..... Passed

------ 0x68

..... Passed

------ 0x40

..... Passed

------ 0x42

..... Passed

------ 0x49

..... Passed

------ 0x4a

..... Passed

------ 0x4c

..... Passed

------ 0x4d

..... Passed