Dell S4048-ON Configuratiehandleiding - Pagina 25

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell S4048-ON. Dell S4048-ON 30 pagina's. Enterprise switches
Ook voor Dell S4048-ON: Configuratiehandleiding (19 pagina's), Handleiding voor probleemoplossing (29 pagina's)

Pagina afdrukken

Switch configuration (OS 10.x)

3.2.11

Apply policies and VLAN ID to all switch edge ports (except port-channel

member ports)

OS10(config)# interface range ethernet 1/1/1-1/1/48

OS10(conf-range-eth1/1/1-1/1/48)# switchport mode trunk

OS10(conf-range-eth1/1/1-1/1/48)# switchport trunk allowed vlan <vlan-id>

OS10(conf-range-eth1/1/1-1/1/48)# service-policy input type network-qos <policy-

map-name>

OS10(conf-range-eth1/1/1-1/1/48)# service-policy output type queuing <queuing-

policy-name>

OS10(conf-range-eth1/1/1-1/1/48)# ets mode on

OS10(conf-range-eth1/1/1-1/1/48)# qos-map traffic-class <queue-map-name>

OS10(conf-range-eth1/1/1-1/1/48)# priority-flow-control mode on

OS10(conf-range-eth1/1/1-1/1/48)# exit

OS10(config)#

3.2.12

Apply policies and vlan id on port-channel and its member ports

OS10(config)# interface port-channel1

OS10(conf-if-po-1)# switchport mode trunk

OS10(conf-if-po-1)# switchport trunk allowed vlan <vlan-id>

OS10(conf-if-po-1)# no shutdown

OS10(conf-if-po-1)# exit

OS10(config)#

This configuration guide uses ports 1/1/49 and 1/1/50 as port-channel member ports which are configured

using following commands.

OS10(config)# interface range ethernet 1/1/49,1/1/50

OS10(conf-range-eth1/1/49,1/1/50)# service-policy input type network-qos

<policy-map-name>

OS10(conf-range-eth1/1/49,1/1/50)# service-policy output type queuing <queuing-

policy-name>

OS10(conf-range-eth1/1/49,1/1/50)# ets mode on

OS10(conf-range-eth1/1/49,1/1/50)# qos-map traffic-class <queue-map-name>

OS10(conf-range-eth1/1/49,1/1/50)# priority-flow-control mode on

OS10(conf-range-eth1/1/49,1/1/50)# exit

OS10(config)# exit

OS10(config)#

3.2.13

iSCSI enable

OS10(config)# iscsi enable

OS10(config)# iscsi session-monitoring enable

OS10(config)# exit

3.2.14

Save configuration

OS10# copy running-configuration startup-configuration

Dell EMC Networking S4048-ON Switch Configuration Guide for Dell PS Series SANs | SCG1026