Miele WS 5323 Gebruiksaanwijzing - Pagina 22

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele WS 5323. Miele WS 5323 36 pagina's.

Pagina afdrukken

Notes

Locked programmes (Disinfecting pro-

grammes)

If a disinfection programme is interrupted

or if there is a fault during the disinfecting

phase (wash time 2), the whole pro-

gramme must be repeated to ensure that

disinfection is achieved.

Turn the key switch to position D "Unlock-

ing".

At this operating level barred programmes

can be unlocked.

Press the End 7 button.

Turn the key switch to position B "Oper-

ation".

The programme can now be repeated.

Locating the drum door to the "Clean side"

The DOOR LOCATING programme rotates

the drum opening to the "Clean side". Unfin-

ished laundry can be transported from the

"Clean side" to the "Unclean side".

The DOOR LOCATING programme can also

be used to transport laundry in the drum to

the "Clean side". It is the user's responsibility

to ensure that the laundry is hygienically

clean before it is removed from the machine.

M.-Nr. 05730940

Rinsing with hot water

Rinsing with hot water is a benefit for ma-

chines connected to a hot water supply.

Standard programmes

1 Cottons 95°C and

2 Cottons 60°C

are programmed to rinse with hot water.

If a hot water supply is available it is an ad-

vantage to run the final rinse with hot water.

This reduces the residual moisture content of

the laundry after spinning and the laundry re-

tains heat.

If the laundry is then tumble dried or ironed

straight after the wash programme savings

will be made in the time it takes to process it

and in the amount of energy required.

Connecting a printer

Printer - operation:

A report of a whole programme or a section of

a programme can be printed. See the pro-

gramming instructions supplied with the

machine.

To print a wash report the machine will have

to be reprogrammed by a Miele Service tech-

nician.

To operate a printer with a parallel interface

an interface adapter is needed between the

serial interface and the parallel interface.