Miele G 2150 Handmatig - Pagina 41
Blader online of download pdf Handmatig voor {categorie_naam} Miele G 2150. Miele G 2150 46 pagina's.
Ook voor Miele G 2150: Handmatig (14 pagina's)
Pagina afdrukkenG 1xxx/G 2xxx
Function
Activating/deactivating
the system lock
Setting the temperature
format
Activating/deactivating
the buzzer
Activating/deactivating
the confirmation tone
Brightness adjustment
Contrast adjustment
Standby
activation/deactivation
Activating/deactivating
the memory
Activating the dealer
demo mode
Resetting standard
settings
Adjusting the main wash
temperature
Water quantity
normal/increased
Activating/deactivating
sensor softener, manually
setting water hardness
Programming
Select System lock. Select
a setting and confirm with
OK.
Select Temperature. Select
a format; confirm with OK.
Select Buzzer. Select a
setting and confirm with OK.
Select Keypad tone. Select
a setting; confirm with OK.
Select Brightness. Select a
setting and confirm with OK.
Select Contrast. Select a
setting and confirm with OK.
Select Standby. Select a
setting and confirm with OK.
Select Memory. Select a
setting and confirm with OK.
Select Dealer. Select a
setting and confirm with OK.
Select Factory default. To
reset the parameters
(settings) modified by the
customer to their standard
settings, confirm with OK.
Select Temperatures, then
Main wash. Select a setting
and confirm with OK.
Select Water plus. Select a
setting and confirm with OK.
Select Water hardness.
Select a setting and confirm
1
with OK.
41
Technical Information
Display
This function is deactivated as
standard. This is indicated in the
display by Off. If the function is
desired, select On.
The temperature can be displayed
in °C or °F as desired.
The options Off, Normal and Loud
are shown in the display.
In the standard settings, the
confirmation tone in the form of an
acoustic signal is activated when a
button is operated. The display
indicates this with On. To switch off
the confirmation tone, select Off.
The brightness of the display can
be set in 17 levels, with level 8 as
the standard setting. Brightness
levels are displayed in bar form.
The contrast of the display can be
set in 17 levels, with level 8 as the
standard setting. Contrast levels are
displayed in bar form.
The display shows the options On
and Not in current prog.
The display is switched off after
approximately 10 minutes in order
to save energy if, during this period,
no control has been activated.
Options: On (standard setting), Off.
With the memory function, the last
selected program can be saved.
For options, see Section 2.13.
The display reads Reset.
Options: Normal and Increased.
Increased wash temperature results
in a longer running time.
Options: Standard and Increased. If
Increased is selected, water intake
increases by 16.9 fl.oz. (500mL).
Auto = Sensor softener activated.
The water hardness at the
installation site can also be
manually set. Water hardness
range: 1°d to 70°d. See Section
2.14.