Miele DA 219-2 EXT Bedienings- en installatie-instructies - Pagina 18
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 219-2 EXT. Miele DA 219-2 EXT 40 pagina's. Miele operating and installation instructions cooker hoods da 216-2, da 216-2 ext, da 217-2, da 219-2, da 219-2 ext
Pagina afdrukkenIf the cooker hood is connected for re-
circulation, two active charcoal filters
must be inserted in addition to the
grease filters. These filters absorb nor-
mal kitchen odours.
They are fitted in the canopy above the
grease filters.
Active charcoal filters can be ob-
tained from your dealer or the Miele
Spare Parts Department.
Refer to the section "Technical data"
for type and reference number.
Before fitting or replacing the active
charcoal filters, the grease filters
must first be taken out, (see previous
section for instructions on how to do
this).
The filters are supplied with fitting in-
structions. Ensure these are carefully
followed.
When fitting for the first time:
Set the operating hours counter to
suit your requirements, (see "Oper-
ation - Altering the filter operating
hours counter").
18
Always replace the filters immediately if
the lamp for the active charcoal filter
touch control comes on, or if they are
no longer effective in absorbing kitchen
odours.
They should, however, be replaced at
least every 6 months.
After fitting new active charcoal fil-
ters, press the active charcoal filter
touch control for approx. 3 seconds
to re-set the operating hours counter.
The indicator lamp will go out.
If the active charcoal filters are re-
placed before the operating hours
counter has reached its maximum,
the active charcoal filter touch con-
trol should be pressed for approx. 6
seconds to reset the counter to zero.