Miele DAR 1230 Bedienings- en installatie-instructies - Pagina 6
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DAR 1230. Miele DAR 1230 40 pagina's. Range wall / insert hood
Ook voor Miele DAR 1230: Bedienings- en installatie-instructies (32 pagina's), Bedienings- en installatie-instructies (22 pagina's), Bedienings- en installatie-instructies (40 pagina's)
Pagina afdrukken
IMPORTANT SAFETY INSTRUCTIONS
To avoid damaging the ventilation hood, make sure that the
connection data (voltage and frequency) on the data plate
correspond to the building's power supply before connecting the
appliance.
If in doubt, consult a qualified electrician.
Do not use a power bar or extension cord to connect the
ventilation hood to electricity. These are a fire hazard and do not
guarantee the required level of appliance safety.
To ensure safe operation, only use the ventilation hood after it has
been properly installed.
This ventilation hood may not be used in non-stationary locations
(e.g. on a ship).
Adequate ventilation must be provided when the hood is operated
simultaneously with devices that burn gas or other fuels.
Only open the housing as described in the enclosed "Installation
diagram" and in the "Cleaning and care" section of this manual.
Under no circumstances should any other parts of the housing be
opened.
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operation faults.
Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
If the power cord is damaged, it must only be replaced by a
qualified service technician.
During installation, maintenance, and repair work, the ventilation
hood must be disconnected from the electrical supply. It is only
completely isolated from the electricity supply if one of the following
applies:
– The circuit breakers on the electrical service panel are tripped.
6