Miele PUR 68 W Bedienings- en installatie-instructies - Pagina 22

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele PUR 68 W. Miele PUR 68 W 40 pagina's. Ventilation system
Ook voor Miele PUR 68 W: Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (40 pagina's)

Pagina afdrukken
Miele PUR 68 W Bedienings- en installatie-instructies
Cleaning and care
Cleaning the grease filters by hand
 Clean the filters with a soft nylon
brush in a mild solution of hot water
and a small amount of washing-up li-
quid. Do not use "neat" washing up
liquid.
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
– cleaning agents containing descaling
agents
– powder cleaners, cream cleaners
– aggressive multi-purpose cleaning
agents or spray cleaners for grease
– oven sprays
Cleaning the grease filters in the
dishwasher
 Place the filters as upright as possible
in the lower basket, with the short
sides upright, ensuring the spray arm
is not obstructed.
 Use a standard household dish-
washer detergent.
 Select a dishwasher programme with
a wash temperature between 50°C
and 65°C.
Depending on the dishwasher deter-
gent used, cleaning the filter in a dish-
washer can cause permanent discol-
ouration to the surface. However, this
will not affect the functioning of the fil-
ter in any way.
22
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before repla-
cing them.
 When removing the filters for clean-
ing, also clean off any residues of oil
or fat from the now accessible hous-
ing to prevent the risk of these catch-
ing fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
 If a grease filter is inadvertently re-
placed upside down, insert a small
screwdriver blade into the slit to dis-
engage the clip.