Miele PDR 518 Bedienings- en installatie-instructies - Pagina 27
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele PDR 518. Miele PDR 518 36 pagina's. Commercial tumble dryers
Ook voor Miele PDR 518: Bedienings- en installatie-instructies (38 pagina's)
Pagina afdrukken
Cleaning the drum and the outside of the casing
Risk of death due to electric shock.
The tumble dryer must be completely disconnected from the power supply before per-
forming cleaning or maintenance work.
Before starting cleaning or maintenance work, always switch off the tumble dryer at the
main switch (on site).
Do not use a pressure washer or water jet to clean the tumble dryer.
Clean the tumble dryer casing, control panel and plastic parts with a mild cleaning agent
or with a soft, damp cloth only. Then rub the tumble dryer casing, control panel and
plastic parts dry.
Abrasive cleaning agents must not be used to clean the tumble dryer.
The tumble dryer drum must be wiped clean with a soft, damp cloth after drying items
that have been starched.
Check the seal.
Check the latches on the drum door and fluff filter compartment cover.
The air intake vent is located on the rear of the tumble dryer.
This vent must never be covered or blocked with objects.
Keep the area around the tumble dryer – in particular the air intake – clear of fluff.
Additional annual cleaning
The Miele Customer Service Department or a trained specialist must check the interior of
the tumble dryer and the ducting for lint deposits once per year and clean the machine if
necessary. In the case of electrically heated tumble dryers, the heater bank and the heating
shaft must also be checked by the Miele Customer Service Department. In the case of
gas-heated dryers, the burner and the burner area must be checked.
Cleaning and care
27