HP 8530w - EliteBook Mobile Workstation Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP 8530w - EliteBook Mobile Workstation. HP 8530w - EliteBook Mobile Workstation 19 pagina's. Hp elitebook mobile workstation
Ook voor HP 8530w - EliteBook Mobile Workstation: Brochure & specificaties (8 pagina's), Quickspecs (36 pagina's), Gebruikershandleiding (15 pagina's), Brochure & specificaties (4 pagina's), Netwerkhandleiding (16 pagina's), Specificaties (4 pagina's), Accessoires Handleiding (2 pagina's), Brochure & specificaties (6 pagina's), Gebruikershandleiding (27 pagina's), Overzicht (16 pagina's), Manuallijnen (12 pagina's), Software-installatiehandleiding (8 pagina's), Manuallijnen (6 pagina's), Installatie- en configuratiehandleiding (18 pagina's), Handmatig (20 pagina's), Manuallijnen (7 pagina's), Gebruikershandleiding (28 pagina's), Quickspecs (47 pagina's)

Pagina afdrukken
HP 8530w - EliteBook Mobile Workstation Installatiehandleiding

System Configuration menu

NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
Language
Boot Options
Device Configurations
10
Chapter 3 Computer Setup menus
To do this
Change the Computer Setup language.
●
Set a Startup Menu delay (in seconds).
●
Enable/disable Custom Logo (disabled by default).
●
Enable/disable Display Diagnostic URL (enabled by
default).
●
Enable/disable CD-ROM boot (enabled by default).
●
Enable/disable SD Card boot (enabled by default).
●
Enable/disable floppy boot (enabled by default).
●
Enable/disable PXE Internal NIC boot (enabled by
default).
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
●
Enable/disable USB legacy support (enabled by default).
When enabled, USB legacy support allows the
following:
◦
Use of a USB keyboard in Computer Setup even
when a Windows® operating system is not running.
◦
Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
●
Select a parallel port mode: ECP (Enhanced Capabilities
Port), standard, bidirectional, or EPP (Enhanced Parallel
Port).
●
Enable/disable fan always on while connected to an AC
outlet (enabled by default).
●
Enable/disable LAN Power Save (select models only).
When enabled, saves power by turning off the LAN when
not in use (enabled by default).
●
Enable/disable Data Execution Prevention. When
enabled, the processor can disable some virus code
execution, which helps to improve computer security.
●
SATA (Serial Advanced Technology Attachment) device
mode. The following options are available:
◦
AHCI (Advanced Host Controller Interface)
◦
IDE (Integrated Drive Electronics)
◦
RAID (select models only)
NOTE:
Availability of the options above varies by
computer model.