HP 8710w - HP Mobile Workstation Multiboot Gebruikershandleiding - Pagina 10

Blader online of download pdf Multiboot Gebruikershandleiding voor {categorie_naam} HP 8710w - HP Mobile Workstation. HP 8710w - HP Mobile Workstation 17 pagina's. Mobile workstation
Ook voor HP 8710w - HP Mobile Workstation: Quickspecs (39 pagina's), Gebruikershandleiding (15 pagina's), Gebruikershandleiding (20 pagina's), Software bijwerken (12 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (20 pagina's), Netwerkhandleiding (16 pagina's), Beveiligingshandleiding (35 pagina's), Gebruikershandleiding (34 pagina's), Installatiehandleiding (6 pagina's), Quickspecs (46 pagina's), Quickspecs (32 pagina's)

Considering boot order changes

Before changing the boot order, note the following considerations:

●

When the computer restarts after the boot order has been changed, the computer attempts to start

using the new boot order.

●

If there is more than one type of boot device, the computer attempts to boot using the first of each

type of boot device (except for optical devices). For example, if the computer is connected to an

optional docking device (select models only) that contains a hard drive, this hard drive will be shown

in the boot order as a USB hard drive. If the system attempts to boot from this USB hard drive and

fails, it will not attempt to boot to the hard drive in the hard drive bay. Instead, it will try to boot to

the next type of device in the boot order. However, if there are 2 optical devices, and the first optical

device does not boot (either because it does not contain media or the media is not a boot disc),

the system will try to boot to the second optical device.

●

Changing the boot order also changes the logical drive designations. For example, if you start up

from a CD-ROM drive with a disc formatted as drive C, that CD-ROM drive becomes drive C and

the hard drive in the hard drive bay becomes drive D.

●

The computer will boot from a NIC device only if the device has been enabled in the Built-In Device

Options menu of Computer Setup and if booting from the device has been enabled in the Boot

Options menu of Computer Setup. Booting from a NIC does not affect logical drive designations

because no drive letter is associated with the NIC.

●

Drives in an optional docking device (select models only) are treated like external USB devices in

the boot order.

Chapter 3 Considering boot order changes