Alloy LED AL-60-03-0008 Specificaties - Pagina 7

Blader online of download pdf Specificaties voor {categorie_naam} Alloy LED AL-60-03-0008. Alloy LED AL-60-03-0008 7 pagina's. Led wifi controller hub

Pagina afdrukken

P18

RGB/White Brightness Slider (P21)

This button can be used in the RGB and CDW color wheels: the following shows

c. pause&run button(P19)

Running button exist in RGB, CDW color wheel interface, they

RGB as an example.

are similar so here will take RGB as an example to explain.

Attention

1. Short press the "W" button.

2. Brightness level can be adjusted from 0-255 to an accurate color.

Note: Before adjusting the color using the color sliders, the LEDs may already

be displaying an existing color, so you will need to clear each channel first: move

the slider in each channel to any level, then move it back to zero. The RGB light-

ing will then turn off, which means the channels have been cleared successfully.

e. RGB/CDW brightness level line(P21)

P18

P19

This button exist in RGB/CDW interface, they are similar, so

P18

here will take RGB as an example to explain.

1)Short press the button

18)

W (White) Button (P22)

2)Brightness level can be adjusted

c. pause&run button(P19)

from 0-255 to an accurate color.

c. pause&run button(P19)

This button only exists in the RGB-W/RGB color wheel, when using RGB-W

Running button exist in RGB, CDW color wheel interface, they

Running & Pause button

Running button exist in RGB, CDW color wheel interface, they

Attention

are similar so here will take RGB as an example to explain.

tape light, to adjust the White channel brightness. Long press the W button

are similar so here will take RGB as an example to explain.

Before adjust the color by color line, LED might in already in

turn the White channel on or off independently. You must use the W button to

an existing color, so we need zero clearing each channel first:

Attention

Fastest speed

moving each channel in any level between 1-225, then move it

adjust the brightness of the W channel independently.

back to zero, then RGB lighting will off which means zero

clearing successfully.

Moving speed

f. W button(P22)

adjust libe

This button only exists in RGB channels color wheel interface to

adjust W channel brightness independently.

Lowest speed

Long press W button

In RGB color wheel interface,it only adjusts R,G and B three channels

brightness,and cannot adjusts W channel.We need use W button

P19

to adjust W channel brightness independently.

g. Brightness button(P23)

e. RGB/CDW brightness level line(P21)

Brightness Button (P23)

This button exist in RGB/CDW interface, they are similar, so

Brightness button exist in RGB, CDW and CCT color wheel

This button exist in RGB/CDW interface, they are similar, so

here will take RGB as an example to explain.

interface.

here will take RGB as an example to explain.

The Brightness button exists in the RGB-W/RGB, CDW and CCT color

1)Short press the button

In CDW and CCT color wheel interface, it adjusts all channels

1)Short press the button

wheels. It adjusts the brightness of all channels.

brightness.

2)Brightness level can be adjusted

from 0-255 to an accurate color.

Attention

Before adjust the color by color line, LED might in already in

an existing color, so we need zero clearing each channel first:

moving each channel in any level between 1-225, then move it

back to zero, then RGB lighting will off which means zero

clearing successfully.

f. W button(P22)

This button only exists in RGB channels color wheel interface to

Save/Recall Button (P24)

adjust W channel brightness independently.

Long press W button

to ON/OFF W channel independently.

Save

Long press W button

In RGB color wheel interface,it only adjusts R,G and B three channels

1. Select a room/zone.

brightness,and cannot adjusts W channel.We need use W button

to adjust W channel brightness independently.

2. Select a color or a color-changing mode.

g. Brightness button(P23)

3. Short press the Save button.

Brightness button exist in RGB, CDW and CCT color wheel

interface.

4. Long press one of the buttons from S1 to S8.

interface.

In CDW and CCT color wheel interface, it adjusts all channels

5. The LED lighting will flash to indicate the setting has been

brightness.

saved successfully.

Recall

1. Select a room/zone.

2. Short press the Save button.

3. Short press one of the buttons from S1 to S8.

to ON/OFF W channel independently.

4. The LED lighting will display the saved setting.

www.AlloyLED.com

page 7 of 7

Specifications

P19

18)

Running & Pause button

Fastest speed

Moving speed

adjust libe

Lowest speed

P19

d. music(P20)

18)

The highest,a low voice

will affect the moving

speed lowest

to ON/OFF W channel independently.

Call: 800.910.LEDS [5337]

Specifications subject to change without notice.

choose successfully, multiple rooms can be choose at same time

Press room button again be confirm the rooms' selection

Lowest speed

Upper area will indicate room's name we selected.

b. color wheel

There will be four different color wheels we can select if we did

not edit the room: RGB, CDW, CCT, Single color.

1)Slide the upper areas from top to down to choose color wheel

d. music(P20)

from one to one. (P16,P17)

Running & Pause button

Fastest speed

Moving speed

The highest,a low voice

adjust libe

will affect the moving

speed lowest

Lowest speed

P15

P20

h. Save button(P24)

P21

P22

1.Save

1)Select rooms/zones

2)Select color or moving modes

3)Short press save button

4)Long press any button of S1-S8

5)LED lighting will flash indicate save successfully.

100% brightness

2.Recall

1)Select rooms/zones

2)Short press save button

3)short press saved button in S1-S8

4)LED will indicate saved color or moving modes

1% brightness

P23

h. Save button(P24)

1.Save

1)Select rooms/zones

2)Select color or moving modes

3)Short press save button

4)Long press any button of S1-S8

Text: 510.400.6690

5)LED lighting will flash indicate save successfully.

2.Recall

1)Select rooms/zones

will affect the moving

speed lowest

P29

P15

P16

P15

d. music(P20)

The highest,a low voice

will affect the moving

speed lowest

P21

P20

P16

P17

When choose

,it will

open your local music

palyer

P23

h. Save button(P24)

The lowest,need a high

1.Save

voice affect moving speed.

1)Select rooms/zones

2)Select color or moving modes

P21

P22

P21

3)Short press save button

4)Long press any button of S1-S8

5)LED lighting will flash indicate save successfully.

2.Recall

1)Select rooms/zones

100% brightness

2)Short press save button

100% brightness

3)short press saved button in S1-S8

4)LED will indicate saved color or moving modes

W channel's

brightness level

1% brightness

P23

h. Save button(P24)

1.Save

1)Select rooms/zones

2)Select color or moving modes

3)Short press save button

4)Long press any button of S1-S8

5)LED lighting will flash indicate save successfully.

2.Recall

1)Select rooms/zones

2)Short press save button

3)short press saved button in S1-S8

4)LED will indicate saved color or moving modes

P24

[email protected]

The lowes

voice affec

P20

P17

P16

100%

W cha

brightn

1% bri

When choose

,it will

When choo

open your local music

open your l

palyer

The lowest,need a high

P22

The lowest

voice affect moving speed.

voice affec

P20

100% brightness

100% b

1% brightness

W channel's

W chan

brightness level

brightn

1% brightness

1% brig

P22

100% brightness

1% brightness

P24