Miller Auto Arc 160 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller Auto Arc 160. Miller Auto Arc 160 41 pagina's.
Pagina afdrukken
3-3. Installing Gas Supply
7
5
4
OM-187 924 Page 12
Argon Gas
OR
6
Tools Needed:
5/8, 1-1/8 in
1
2
3
3
8
9
CO
Gas
2
Obtain gas cylinder and chain to
running gear, wall, or other station-
ary support so cylinder cannot fall
and break off valve.
1
Cap
2
Cylinder Valve
Remove cap, stand to side of valve,
and open valve slightly. Gas flow
blows dust and dirt from valve.
Close valve.
3
Cylinder
4
Regulator/Flowmeter
Install so face is vertical.
5
Gas Hose Connection
Fitting has
5/8-18
right-hand
threads.
6
Gas Fitting
Install gas hose between gas hose
connction on regulator/flowmeter
and gas fitting on rear of welding
power source.
7
Flow Adjust
1
Typical flow rate is 20 cfh (cubic feet
per hour). Check wire manufactur-
er's recommended flow rate.
8
CO
Adapter
2
2
9
O-Ring
Install adapter with O-ring between
regulator/flowmeter
and
cylinder.
ssb3.1* 12/92 − ST-158 697-A / ST-801 986
CO
2