Miller XMT 300 CC/TIG Gebruikershandleiding - Pagina 43
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller XMT 300 CC/TIG. Miller XMT 300 CC/TIG 44 pagina's.
Pagina afdrukken
OPTIONS
AND ACCESSORIES
lNTELLITIG~
4
PRECISION
TIG CONTROLLER
(#042 598)
Provides
high-frequency
arc
starting,
timed gas solenoid control
and
metering, pulsing, sequencing,
sloping,
on-screen
voltage
and
amperage
metering,
and two
relay
contacts
for
fixturing.
The control
provides
four modes of
operation:
Automatic,
Semiautomatic,
Manual
GTAW and SMAW. For
detailed
information,
refer
to
product
Literature Index No. AY/9.0.
PC-300 PULSED GTAW
(DC TIG)
CONTROL
(#042 297)
Can be used with power
sources
that have built-in
high frequency,
or
it
can
be
use
with
an
external
high-frequency
unit. The control
has two
internally
switchable
scales:
a
0.5 to 20
pulses-per-
second scale for both inverter and
non-inverter
type
power
sources,
and
a
10 to 300
pulses-per-second
scale for inverter power
sources
only.
Control includes
8
ft.
(2.4 m)
interconnecting
cord and 115 VAC
power cord. Front
panel
controls
provide:
Peak
Amperage Adjustment
Background Amperage
Adjustment
Pulses-Per-Second
Adjustment
(0.5
to 20
pulses-per-second
scale
or
10 to 300
pulses-per-second scale)
Percent On Time Control
Amperage
Remote/Panel Control
Output
Contactor On/Off Control
Pulser On/Off
Power On/Off
Remote Control
Receptacle (for
remote
hand
or
foot
controls)
MMP MANUAL MUG PULSER
PENDANT CONTROL
(#042 727)
The MMP Manual MIG Pulser
Control allows manual control of
the
pulse
wave
form. This control
provides independent
control of
the four
parameters
that affect the
pulse
process:
Frequency: Adjust
the
pulse
rate
within
a
range of
20
pulses-per-
second
to 200
pulses-per-
second.
Pulse Width:
Adjust
the
amount
of on
time. Maintains
arc
stability. Adjusts
from
1 to 5
milliseconds.
Peak Current Level: Set the
peak
amperage that the
pulse
wave
form will allow
(25%
to
100% of maximum
output
of
power
source). Helps pinch
off
the electrode
droplet.
Background
Current Level: Set
the
background
current
level
to
sustain the
arc
(3%
to 25%
of
maximum
output
of power
source).
This control allows
precision pulse
welding
with
a
wide
variety
of wire
sizes,
gases,
materials,
and
joint
configurations.
Includes 25 ft.
(7.6 m)
connector
cord and
a
17-pin plug
for direct
connection
to the
front of the
power
source.
Note: For best
performance,
do
not
run
the XMT
on
200
or
208 pnma,y
voltage
when
using
this accessoty.
REMOTE CONTROLS
RFC-14 FOOT CONTROL
(#129 339)
Foot
current
and
contactor
control.
Includes 20 ft.
(6 m)
cord and
14-pin plug.
RHC-14 HAND CONTROL
(#129 340)
Miniature hand control for
remote
current
and
contactor
control.
Dimensions:
4
in.
(102 mm)
x
4 in.
(102 mm)
x
3-1/4 in.
(82 mm).
Includes
20 ft.
(6 m)
cord and
14-pin plug.
TORCH-MOUNTED
REMOTE HAND
CONTROLS
RMLS-1
4
(#129 337)
Momentary-
and
maintained-contact rocker switch
for
contactor
control. Push forward
for maintained
contact
and back
for
momentary
contact.
Includes
20 ft.
(6 m)
cord and
14-pin
Amphenol plug.
RCC-14 REMOTE
CONTACTOR
AND CURRENT CONTROL
(#151 086)14-pin plug
Rotary
motion
fingertip
control
fastens
to
TIG torch
using
two
Velcro
straps.
Includes
28
ft.
(8.5
m)
control cord.
EXTENSION CORDS FOR
REMOTE CONTROLS AND
24 VAC WIRE FEEDERS
14-pin Amphenol plug
to
a
14-pin
Amphenol
socket.
lOft.
(3 m)
25 ft.
(7.6 m)
50
ft.
(15.2 m)
75
ft.
(22.8 m)
XMT RACK
8 Pak Rack
(#042 813)
For
operation
on
460
or
575
VAC
8 Pak Rack
(#042 648)
For
operation
on
230
or
460
VAC
4 Pak Rack
(#042 812)
For
operation
on
230
or
460 VAC
The
rugged
8 Pak Rack houses
and powers up
to
eight
XMT 300
power
sources.
The rack
measures
66 in.
(1.68 m)
wide
x
41 in.
(1.04 m) deep
x
72 in.
(1.83
m)
tall,
and
weighs
1700
lbs.
(771
kg)
when loaded with
eight
XMTs
(with
no
welding cables).
The
4
Pak Rack
measures
66 in.
(1.68
m)
wide
x
41 in.
(1.04 m) deep
x
57 in.
(1.45 m)
tall,
and
weighs just
800 lbs.
(363 kg)
with four XMT
300 units.
The XMT Rack
provides
many
important
features:
Two
115
VAC,
20
Amp
GFCI
duplex receptacles
for
auxiliary
tools
(8
Pak Racks
only)
Provisions for
paralleling
power
sources or common
work
connections
Power
sources can
be locked
down
to
prevent
theft
Captured secondary
cable
hangers
for work leads and weld
cables
Center
lifting
eye
Rugged
skids for
dragging
or
pushing
(#122 972)
(#122 973)
(#122 974)
(#122 975)