ABB Endura AZ40 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} ABB Endura AZ40. ABB Endura AZ40 16 pagina's. Oxygen and carbon monoxide equivalent (coe) analyzer
Ook voor ABB Endura AZ40: Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (20 pagina's)

Pagina afdrukken

5.4 Removing the sensor assembly from the process

DANGER – Serious damage to health / risk to life

Allow sufficient time for the sensor assembly to cool

before performing this procedure.

Referring to Fig. 5.4:

1. Use a 10 in. adjustable spanner (wrench) to remove 4 nuts,

washers and lockwashers A securing sensor assembly

B to mounting flange C. Set items aside for re-use.

2. Carefully remove the sensor assembly and the attached

probe (including filter assembly) from the process.

3. Temporarily cover process opening until the sensor

assembly is ready to be re-installed.

Fig. 5.4 Removing the sensor assembly from the process

INS/ANAINST/008-EN Rev. B | Endura AZ40 | Sensor assembly | Heater and thermocouple kit