Aquasanita SABIA ECO 5523E2 Installatie- en onderhoudsinstructies - Pagina 3

Blader online of download pdf Installatie- en onderhoudsinstructies voor {categorie_naam} Aquasanita SABIA ECO 5523E2. Aquasanita SABIA ECO 5523E2 12 pagina's. Kitchen faucet

Pagina afdrukken

Thank you for purchasing our product. Be sure to follow the guidelines given in the faucet installation and maintenance instruction

when using the product. The 2-year warranty applies to the product.

1. IMPORTANT!

It is crucial to follow these instructions in installing and maintaining the casual care of the faucets. Correct installation of the faucet

ensures long-term operation and good appearance of the product. Please follow the given instructions on the installation and maintenance

of the faucets to avoid their malfunctioning and enjoy the quality operation of the faucets.

2. PRODUCT FUNCTIONS.

This product is designed to mix, stop, drain and dispose of the ﬂow and temperature of the running water.

• The operating water pressure of the faucet - 0.5 bar.

• The maximum water pressure – 5 bars.

• The optimal operating water pressure - from 1 to 5 bars.

3. NECESSARY INSTRUCTIONS TO BE TAKEN INTO ACCOUNT BEFORE THE INSTALLATION.

3.1. Rinsing of the water supply pipe. Before connecting the faucet to the water supply, it is necessary to drain 2-3 liters of water

from the pipe to which the faucet will be connected, to remove this way any dirt that may have accumulated there (doing so is

especially important if the faucet is being connecting to a new water supply pipe line).

3.2. After having connected the faucet to the water supply pipes, gradually open the water supply valve and, at the same time,

check all connections of the faucet for airtightness and water impermeability. Then try the faucet itself and all its functions.

4. INSTALLATION.

For the maximum customer satisfaction with the use of faucets, we recommend entrusting the installation to a professional.

4.1. To prevent any mechanical impurities from entering the faucet from the water supply pipes, it is recommended to install before the

faucet a rough water puriﬁcation ﬁlters of no more than 100 mikrons.

5. MAINTENANCE AND CLEANING INSTRUCTIONS.

To ensure the durability of the faucet, we might follow the instructions noted below:

• Clean the surface of the faucet regularly.

• Abrasive agents CANNOT be used for cleaning.

• Use for the cleaning natural products, that cause no damage to the, such as a mix of food vinegar and water or soapy water.

• Use only soft cloths for the cleaning.

• Vinegar diluted with water is recommended to be used to remove limescale deposits. After using the mix of water and vinegar, it is

necessary to rinse the surface of the faucet with clean warm water and wipe it dry.

• The surface of the faucet cannot be cleaned with chemical substances containing acid, alcohol or solid particles, as this may cause damage

to the surface of the faucet housing and result in corrosion.

• Clean the aerator regularly or replace it.

faucet. In this case, the manufacturer is not responsible for damaged surfaces.

The manufacturer shall assume no responsibility if:

• the users fails to follow the installation and maintenance instructions;

• the users use the product not for its intended purpose;

• the users use spare parts of another manufacturer;

• if the faucet was repaired by an unqualiﬁed person;

• if the faucet was operated in a wrong way;

• if the defect resulted from wrongly installation of the faucet;

• if the surface of the faucet and of its parts is mechanically damaged or scratched;

• if mechanical impurities have entered the inside of the faucet, when there is a huge amount of limescale deposits and when the water

inside the faucet got frozen;

• if the faucet is delivered incomplete or without original packaging.

Note: The manufacturer reserves the right to make changes to the model of the item without impairing its quality and functions.