Aquatic BLUECUBE6 BC6 MINI Gebruikers- en installatiehandleiding - Pagina 5

Blader online of download pdf Gebruikers- en installatiehandleiding voor {categorie_naam} Aquatic BLUECUBE6 BC6 MINI. Aquatic BLUECUBE6 BC6 MINI 15 pagina's. Hide-away media player

Pagina afdrukken

Getting Started

1.4. Mounting the BC6 MINI

1. Make sure the outside surface is clean

and clear of debris.

2. The BC6 MINI has four (4) front screws.

Drive the screws using a screw driver.

Make sure screws are snug and do not over

tighten.

1.5 Bluetooth Antenna Installation

1. Screw on the provided Bluetooth Antenna,

avoiding bending the cable at a 90° angle.

2. Install the Bluetooth antenna as high as

possible, above the waterline of the spa if possible,

and making sure the arrow is pointing directly

upwards towards the sky to ensure the Bluetooth

range is maximized. If there is no suitable surface

to screw it in, we recommend using a good quality

double sided tape.

1.6 Power Attenuation Wires

The BC6 MINI's power can be reduced or

increased to suit different applications.

An output level of -3dB or -6dB should be

used to avoid blowing very small speakers,

often used in spa applications.

By cutting only the white wire the output

level will decrease to -6dB below the nominal 0dB.

By cutting both the white and black wires the power/volume will increase to +6dB above the

nominal 0dB.

By cutting only the black wire the power/volume will increase from -3dB to the nominal 0dB.

These modifications should only be carried out by an experienced audio installer.

Should you cut the wrong wires or wish to reconnect them to further alter the attenuation, the Power Attenuation

Wires can be crimped back together.

www.aquaticav.com

Black Wire

White Wire

Intact (not cut)

Cut

Intact (not cut)

Cut

BlueCube Media Player BC6 MINI

Output Level

-3dB

-6dB

0dB (reference)

+6dB