Aquatic Access IGAT-180/135 Installatiehandleiding - Pagina 7
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Aquatic Access IGAT-180/135. Aquatic Access IGAT-180/135 18 pagina's.
If your static water pressure measurement is greater than 70 PSI, a reducer
must be used between the water sources and the lift or damage to the lift
may result. Purchase a reducer at your local plumbing supply store. Aquatic
Access Inc. is not liable or responsible for damage caused by excessive
water pressure.
Most installations will operate with a garden hose connected to a convenient faucet. However, on
new deck construction, a recessed water connection with a shut-off valve may be plumbed in and
a short appliance hose can serve as a connection. If a recessed water source is installed, when you
are facing the pool, and the lift is between you and the water, the recessed water source should be
placed to the RIGHT side of the socket, or the side opposite the turning seat.
Operating Water Pressure
(Add ~10% for static water pressure measurement)
PRESSURE
31-36 PSI
43-51 PSI
55-65 PSI
Lifting capacity was tested at lift connection on a baseline unit with operating water pressure
while lifting (open flow pressure) and under ideal mounting conditions pursuant to installation
instructions. Static water pressure measurement will be approximately 10% higher.
Installation variables may also require a higher water pressure than listed. These may include:
1. The cylinder not being installed and maintained in a vertical position,
2. The wheelbase mounting plate not adjusted to touch the pool wall to insure that the cylinder
remains vertical,
3. The post being inserted into the socket with the key not fitting properly into the socket notch,
4. The T-support bracket not being tightened enough to prevent movement.
5. Options and accessories, which may increase the weight of the lift and the pressure
requirements.
Occasionally, an additional support bracket may be required for lift stability. This may reduce
the ease of portability by requiring a tool for lift removal. Contact manufacturer for more
information.
In true low water pressure situations, electric pumps are available to provide sufficient water
pressure for up to a 400 lb. lifting capacity.
Weight Lifted
POUNDS
200
300
400
3
KILOGRAMS
91
136
181