Panasonic SA-PM86D Gebruiksaanwijzing - Pagina 30

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic SA-PM86D. Panasonic SA-PM86D 36 pagina's. Dvd stereo system model no. sc-pm86d

Pagina afdrukken

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the

chart do not solve the problem, consult your dealer for instructions.

■ Power

No power.

The unit is automatically

switched to the standby mode.

■ Unresponsive or inoperable function

No response when any buttons

are pressed.

No response when remote

control buttons are pressed.

Other products respond to the

remote control.

No picture or sound.

You have forgotten your ratings

password.

Reset all the settings to Factory

Preset.

The VIERA Link "HDAVI

Control

" function does not

respond.

■ Speciﬁ c operation undesirable or unexpected

It takes time before play starts.

Folders on a data CD are not

displayed correctly.

A menu screen appears during

skip or search.

Playback control menu does

not appear.

with playback

control

The program and random play

functions do not work.

Play does not start.

■ Subtitle

No subtitles.

■ A-B repeat

Point B is automatically set.

■ Menus

The Setup menu cannot be

accessed.

• Insert the AC mains lead securely.

• The Sleep timer was working and had reached the set time limit.

• This unit cannot play discs other than the ones listed in these operating instructions.

• The unit may not be operating properly due to lightning, static electricity or some other

external factor. Turn the unit off and then back to on. Alternatively, turn the unit off, disconnect

the AC mains lead, and then reconnect it.

• Condensation has formed: Wait 1 to 2 hours for it to evaporate.

• Check that the batteries are installed correctly.

• The batteries are depleted. Replace them with new ones.

• Aim the remote control at the remote control signal sensor and operate.

• Change the remote control operating mode.

• Check the video or speaker connection.

• Check the power or input setting of the connected equipment and the main unit.

• Check that the disc has something recorded on it.

• While stopped and "DVD/CD" is the source, press and hold [7, –DEMO] (stop) on the main

unit and [h10] on the remote control until "INITIALIZED" (or "INITIALISED") disappears from

the television. Turn the unit off and on again.

All settings will return to the default values.

(This does not work during program and random modes, or when setup menu or START

menu is displayed.)

• Depending on the condition of the stereo system or the connected equipment, it may be

necessary to repeat the same operation so that the function can work correctly.

• Play may take time to begin when an MP3 track has still picture data. Even after the track

starts, the correct play time will not be displayed. This is normal.

• This is normal on DivX video.

• Folders deeper than the eighth layer are displayed as the eighth layer.

• This is normal for Video CDs.

• Press [7] twice and then press [3, DVD/CD].

• These functions do not work with some DVD-Videos.

• This unit may not play WMA and MPEG4 that contains still picture data.

• If playing DivX VOD content, refer to the homepage where you purchased the DivX VOD

content. (Example: www.divx.com/vod)

• If a disc contains CD-DA and other formats, proper playback may not be possible.

• Display the subtitles. ("SUBTITLE" in Functions menu)

• Subtitles may not be displayed depending on the disc.

• The end of an item becomes point B when it is reached.

• Select "DVD/CD" as the source.

• Cancel program and random play.

• Cancel JPEG's playback.

Page

—

6, 7

—