Olympus BXC-CBB Gebruiksaanwijzing - Pagina 14
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus BXC-CBB. Olympus BXC-CBB 41 pagina's. Modular microscope assemblies hardware
Pagina afdrukken3.5 Setting up BXC-CBB
TIP:
Before setting the DIP switch, set the main switch to ○(OFF).
The switch settings are read and defined after Power-ON.
1.
Confirm that the DIP switch on BXC-CBB is set properly.
The allocated functions of the DIP switches are shown in the table below.
: Factory default setting
SW-No.
1
2
3
4
5
Off
On
Off
On
Off
On
Off
On
Off
On
3. Setup procedures
Function
6
7
8
Buzzer sound
Nosepiece (NP)
1
AS control*
NP Control*
Reserved by maker Always OFF
Off
Reserved by maker Always OFF
On
Off
Reserved by maker Always OFF
On
Off Reserved by maker Always OFF
On
The buzzer sound is heard
The buzzer sound is not heard
5Position-NP
6Position-NP
Normal
High-precision control (lost motion reduction)
2
Rotate through the highest numbered hole
Does not rotate through the highest numbered hole
Note
3.5 Setting up BXC-CBB
10